G98/99/100 type test report downloads
If you are requested to supply the type test report to accompany your DNO application, a full archive of downloads is provided below: ModelG98G99G100Cyber Security DeclarationS G2 (all models)DownloadDownloadF3000 (G3)Download Download F3600 (G3)Download F4600 (G3) DownloadF5000 (G3) DownloadF6000 (G3) DownloadG7 DownloadDownload G8 DownloadG9 DownloadG10 DownloadG10.5 DownloadT3 (G3)Download Download T4 (G3)Download T5 (G3)Download T6 (G3)Download T8 (G3)Download T10 (G3)Download T12...
Fault current contribution data
As part of a DNO application, it may be necessary to submit fault current contribution data that is not detailed on the specific G98/99 type test report. Where required, please see documents below: For H1-G2, K Series, H3 and H3...
Why FoxESS recommends a minimum 100mA RCD on the AC side
One of the more frequent questions we receive from UK installers concerns our recommendation for RCD protection on the AC side of our inverters. Specifically, when external RCD protection is required (based on local regulations or specific installation conditions), we...
Why does FoxESS recommend higher-rated MCBs than the inverter’s output?
One of the most common questions we get from installers and system designers is:“Why does the recommended MCB size in the FoxESS manual seem higher than the inverter’s rated output current?” At first glance, it seems counterintuitive. If an inverter...
PV oversizing with Fox ESS inverters: what you need to know
At Fox ESS, we’re often asked about PV oversizing—connecting a larger solar array than the rated power of the inverter. The good news? PV oversizing is not only permitted with our inverters, but it’s also a widely accepted design strategy...
